ValetPro - 24 Plus Ceramic Coating 30ml

ValetPro 24Plus Ceramic Coating has been specially developed for easy application without compromising durability. 24Plus Ceramic Coating offers more than 2 years of protection with a safe Ph neutral wash procedure. 24Plus has been specially formulated to provide a slower flash-off time, drastically reducing the risk of leaving a lot of stains during application.

Instructions:

1. Invert the coating bottle 3 times before opening
2. Wrap an applicator suede around the applicator block
3. Apply a few drops of the coating evenly to the suede
4. Spread the coating evenly over 40cm x 40cm of one panel at a time
5. The coating should be buffed out while it dries before applying the coating to the next section (drying time within 1 to 3 minutes, depending on the application temperature)
6. After the entire vehicle has been coated, allow the coating to cure for a minimum of 12 hours in a controlled (indoor) environment before driving

Please Note: ValetPRO 24Plus Ceramic Coating provides 24+ months of protection when pH neutral safe wash routines are followed. 24Plus should be stored in a cool, dry place. After opening, 24Plus should be used within 30 days. Precautions: Do not apply in direct sunlight or when the vehicle surface is hot. Gloves and respiratory protection must be worn. Do not use applicator suede or cloths that have been used to buff the coating.