Puris - A70 Coating Set

Puris A70 is a nice starting coating for the novice detailer, this spray coating that has a service life of up to 1 year.

Contents:

• Puris A70 300ml
• 2x Mike O'Fiber Royal Plush Microfiber Applicator
• 4x Coating removal cloth 40x40cm

1. Snow foam the vehicle
2. For metal contamination, use the Puris D72 Iron Remover
3. Wash the vehicle thoroughly with Puris D11 or D14
4. If necessary, clay the paint and then wash it again
5. Dry the paint with a drying cloth or chamois
6. Polish the paint if necessary!
7. Prep the paint with, for example, Carpro Eraser or IGL Coatings Precoat!
8. Allow the paint to flash off for 15-20 minutes before applying the coating
9. Spray or drop coating onto the included Mike O'Fiber Royal Plush Microfiber Applicator
10. Apply the coating in strips, max 1 panel
11. If the coating flashes or produces an oily layer, wipe it off with 2 cloths.
12. Cloth 1, for removing most residue
13. Cloth 2, buff until the paint becomes nice and even
14. Leave the vehicle indoors for at least 1 night, optimally 24 hours
15. Puris A68 may be applied after 24 hours.
16. Do not wash or hose down the vehicle for at least 14 days!